www.unicomradio.com
$12.00
This is an adjustable resistor or variable resistor (variable resistance). It can be used as a rheostat, but structurally it has 3 contacts in its composition, which allows it to be used as a voltage divider. The change in resistance occurs when the handle is turned.
 |
 |
|
Resistance Range
|
1 kOhm – 500 kOhm |
|
Resistance Deviation
|
±20% |
|
Resistance Change Feature
|
B |
|
Maximum Service Voltage
|
AC 50 V |
|
Rated Power
|
0.125 W |
|
Rotation Noise
|
< 47 mV |
|
Residual Value
|
< 20 Ohm |
|
Insulation Resistance
|
100 MOhm at DC 500 V |
|
Rotation Angle
|
300° + 5° |
|
Rotation Moment
|
20 gf.Cm – 200 gf.Cm |
|
Stop Torque
|
5 kgf.Cm Min |
|
Shaft Handle Pull-out Strength
|
6.0 kgf.Cm Min |
|
Rotation Life
|
10,000 cycles |
 |
 |
 |
| Weight | 0.1 kg |
|---|
Two-section variable resistor for mounting on a printed circuit board. RK097G resistors are designed for operation in DC, AC and pulse current electrical circuits. They are widely used in industrial, household equipment and amateur radio structures.
The rotary encoder can count the quantity of output pulse in the positive and negative direction rotation. Application: Stepper and servo motor control. You could also use it to control devices like digital potentiometer.
Variable resistor for mounting on a printed circuit board. RK097N resistors are designed for operation in DC, AC and pulse current electrical circuits. They are widely used in industrial, household equipment and amateur radio structures.
The WH148 potentiometer can be used to adjust the sound volume, motor speed, brightness and other parameters that are changed by voltage or current.
Reviews
There are no reviews yet.