SDP750 DMR Portable Radio 400 – 470 MHz T1 Band up to 5 Watt 3400 mAh Lithium-ion (Li-Ion) Complete Kit with GPS and Man Down

$614.99

The Simoco Xd SDP750 is a digital portable radio capable of operating across multiple modes, including analogue conventional, digital conventional (DMR Tier II) and digital trunking (DMR Tier III).

Description

Best in class sensitivity ensures crystal-clear communications in fringe areas and harsh environments while a compact form factor means the radio is suitable for a wide range of users.

The SDP750 offers a rich feature set including full-duplex calling, allowing for enhanced communications between office and field staff. Additional features include GPS, long battery life and Bluetooth to allow for the connection of additional wireless accessories.

The radio’s ability to allow the user to operate across a variety of network signature modes means it is not only a safe and future proof investment but also provides a cost-effective and flexible migration path for organisations managing the transition from analogue to DMR digital.

Frequency BandsVHF: 136–174MHz
UHF: 400–470MHz
UHF: 450–520MHz
Channel Capacity256
Channel Bandwidth12.5/25kHz
Dimensions125x54x35mm
Weight320g (Standard battery and antenna)
Operating VoltageDC 7.3V ±15%
BatteryStandard: 2400mAh (Li-Ion)
Option: 3400mAh (Li-Ion)
Battery (5-5-90 duty cycle, High TX Power)Analogue: 12 Hours
Digital: 14 Hours
Model VariantSDP750 without GPS & Man Down
SDP750 with GPS & Man Down
SDP750 with GPS, Man Down, Full Duplex & Bluetooth
Frequency Stability0.5ppm
RF Power OutputVHF: High: Up to 5W
Low: Up to 1.25W
UHF: High: Up to 4.5W
Low: Up to 1.25W
Digital Modulation7K60FXD (Data Only)
7K60FXE (Data and Voice)
Analogue Modulation16K 0F3E @ 25kHz
11K 0F3E @ 12.5kHz
Adjacent Channel Power70dB @ 25kHz
60dB @ 12.5 kHz
Conducted and Radiated Emission-36dBm (<1GHz)
-30dBm (>1GHz)
Transmission Deviation Limits5kHz @ 25kHz
2.5kHz @ 12.5kHz
Audio Distortion3% Analogue 5% Digital
Hum and Noise49dB @ 25KHz
43dB @ 12.5KHz
55dB @ Digital
Audio Response+1 ~ -3dB
Digital SensitivityTypical: -121dBm / BER 5%
Typical: -118dBm / BER 1%
Analogue SensitivityTypical: -121dBm / 12dB SINAD
Intermodulation>70dB (TIA603) >65dB (ETSI)
Blocking84dB (TIA603 & ETSI)
Spurious Response Rejection>70dB (TIA603 & ETSI)
Adjacent Channel Selectivity70dB@25 kHz (TIA603 & ETSI)
60dB@12.5 kHz (TIA603 & ETSI)
Conducted Spurious Emission-57dBm (<1GHz)
-47dBm (>1GHz)
Rated Audio Power Output1.8W
Rated Audio Distortion3% Analogue 5% Digital
Hum and Noise49dB @ 25kHz
43dB @ 12.5kHz
55dB @ Digital
Audio Response+1 ~ -3dB
Digital Vocoder TypeAMBE+2
Digital ProtocolETSl TS 102 361-1, -2, -3, -4
Operating Temperature-30 – +60ºC
Storage Temperature-40 – +85ºC
Dust and Water IntrusionIP67 (IEC60529)
EnvironmentalMIL-STD-810 C/D/E/F/G
ESDIEC 61000-4-2 (level 4) ±8KV (Contact), ±15VK (Air)
Tiff Cold Start<120s
Tiff Hot Start<10s
Horizontal Positioning Accuracy<10s
Acquisition Sensitivity<-140dBm
Tracking Sensitivity<-152dBm
Call Types
Individual CallRadio to radio and radio to/from dispatch
Group CallRadio to group or dispatcher to group
Analogue PABX/ DTMF + Over dialDTMF dialling plus onward dial through extensions/automated reception options
Call to PSTNTerminals can call PSTN numbers via the PABX
SIP PABX CallRadio to/from PABX via SIP interface
Short Data MessagingText message to/from radios and/or dispatch
Status MessagingSend pre-scanned messages quickly over the air via (shortcode digits) menu
All CallCall to all devices on a network from radio or dispatch with all PTTs disabled
Full Duplex DMO CallsRadio to radio calls in full-duplex mode

Convenience
GPSSupports Global Positioning System
BluetoothV4.0 can be used with BT device for audio plus BT PTT Accessory available and BT Palm Microphone for vehicle installs
Noise ReductionThe software activated in the device
Real-time clock and CalendarDisplays date and time in the menu bar
French LanguageFrench GUI
Missed Call ListMissed calls can be called back from the list via the PTT
Call DiversionUsers can set divert incoming to another radio ID
Dial String Call ModifiersUse Dial Strings to modify call types or status messages – includes auto-detect telephone dialling

Worker Safety Needs
Lone WorkerUser can set – If idle, radio prompts for response at pre-programmed intervals – radio raises emergency call on pre-configured criteria
Duress CallCan be alarm and/or call – configurable hot mic. duration/tone – can use Priority Interrupt
Man DownTerminals can be set to trigger a duress call when either tilted beyond a preset amount or no movement is detected for a preset time
Emergency Call IndicationReceiving radio can be set to visually indicate when a call is an Emergency Call
Call AlertRadio emits a loud tone until acknowledged by the user
Radio CheckA supplementary feature used by authorised radios to determine whether a particular target radio is switched on within coverage and active
Radio MonitorSupplementary service which enables suitably authorised radios to remotely enable the microphone of target radios for a predefined period of time

High Security
AuthenticationAuthentication of a device upon registration to a network or on stun/ revive commands
Stun / Revive / KillStun, revive and/or kill a radio from an authorised user radio or dispatch
Enable / ReviveSimilar to stun and revive
EncryptionAES Encryption 256 bit

Management of Network and Radio Features
OTAPTerminals support over the air reprogramming (OTAP)
Enhanced Subscriber ManagementEnhanced management of subscribers configuration and feature control for network operators
Multi-Site RoamTerminals hunt for the strongest signal and can roam between sites
Group Presence CheckFor group calls, only the sites where group members are registered at the time are involved in the call
Mixed Mode ScanningIncreased network availability and access to mixed digital and analogue channels – Terminals are programmed with scan lists and a scan list can then be assigned to a channel

General
Operating ModesAnalogue conventional, digital conventional (DMR Tier II), and digital trunking (DMR Tier III)
Frequency BandsAvailable in VHF and UHF frequency bands
RF performanceExceptional RF performance – exceeds ETSI and TIA-603 specifications
ComplianceFully compliant with ETSI DMR standards
MIL-STD and IP RatingMIL-STD-810 & IP67
Audio OutputMarket-leading 1.8W audio output
Receiver sensitivity-121dBm receiver sensitivity (typical) – increase the coverage area and improve audio quality

Additional information

Weight 2 kg