RigExpert AA-650 Zoom Analyzer


RigExpert Antenna Analyzers are powerful antenna analyzers designed for testing, checking, tuning, or repairing antennas and antenna feed-lines. Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers). Their large, bright LCD screens provide a graphic illustration of SWR, impedance; return loss, and much more.

SKU: 57-496 Category: Tags: , ,


RigExpert AA-650 Zoom Analyzer

The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 650 MHz. A built-in Zoom capability makes graphical measurements especially effective. An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system. The analyzer is equipped with a Bluetooth Low Energy module for a wireless connection with your laptop, tablet or smartphone.

      The following tasks are easily accomplished by using this analyzer:

  • Rapid check-out of an antenna
  • Tuning an antenna to resonance
  • Comparing characteristics of an antenna before and after specific events (rain, hurricane, etc.)
  • Making coaxial stubs or measuring their parameters
  • Cable testing and fault location, measuring cable loss and characteristic impedance
  • Measuring capacitance or inductance of reactive loads
Rigexpert AA-650 Zoom Analyzer
  • Measurement For: 25, 50, 75, 100, 150, 200, 300, 450 and 600Ω systems
  • Frequency: 0.1 to 650 MHz
  • Frequency Entry: 1KHz resolution
  • SWR Measurement Range: 1-100 in numerical mode / 1-10 in chart mode
  • R Range: 0… 2000, -2000… 2000
  • Dimensions: 230 mm x 100 mm x 55 mm
  • Weight: 650 g
  • Operating Temperature: 0-40 C (32-104 F)
  • SWR Return Loss: R, X, Z, L, C magnitude and phase angle at one frequency
  • SWR Chart: 100 points
  • SWR Chart at Fixed HAM Bands by IARU Regions: 100 points
  • Cable tools (Velocity factor and Cable length measurer, Stub tuner, Cable loss chart, Cable impedance chart), TDR
  • Connector type: N
  • Output Signal Shape: Square 0.1 to 200 MHz for higher frequencies, harmonics of the main signal are used
  • Output Power: -10 dBm (at 50 Ohm load)

Additional information

Weight1 kg