Description
A built-in ZOOM capability makes graphical measurements especially effective. An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.
The following tasks are easily accomplished by using this analyser: Rapid check-out of an antenna. Tuning an antenna to resonance. Comparing characteristics of an antenna before and after a specific event (rain, hurricane, etc.). Making coaxial stubs or measuring their parameters. Cable testing and fault location, measuring cable loss and characteristic impedance. Measuring capacitance or inductance of reactive loads.
- Frequency: 0.1 to 230 MHz
- Frequency Entry: 1 KHz resolution
- Measurement For: 25, 50, 75 and 100-Ohm systems
- SWR Measurement Range: 1-100 in numerical mode / 1-10 in chart mode
- R&X Range: 0…10000, -10000…10000 in numerical mode / 0… 1000, -1000… 1000 in chart mode
- Dimensions: 82 mm x 182 mm x 32 mm
- Weight: 236 g
- Operating Temperature: 0-40 C (32-104 F)
- SWR at single or multiply frequencies
- SWR Return Loss: R, X, Z, L, C at single frequency
- SWR Chart: 20 – 500 points
- RX Chart: 20 – 500 points
- Smith Chart: 20 – 500 points
- Return Loss Chart: 20 – 500 points
- TDR (Time Domain Reflectometer) chart
- Cable Tools (loss and characteristic impedance)
- 100 slots to save measurement results
- Connector: N-type
- Output signal shape square
- Output Power: -10 dBm (at 50 Ohm load)
- Four 1.5V alkaline batteries, type AAA
- Max. 4 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
- When the analyser is connected to a PC or a DC adapter with USB socket, it takes power from these sources
- 290 x 220 colour TFT display
- 6 x 3 keys on the water-proof keypad
- Multilingual menus and help screens
- USB connection to a personal computer
- Bluetooth Version 4.0 (BLE)
- Compatible with Android OS Version 6.0 and higher
- Analyzer AA-230 Zoom does not work through Bluetooth connection together with OS Windows and AntScope 2