PowerVerter PV6S Pro Voltage Reducer 6-10A

$40.00

A high-quality non-isolated DC-DC converter. Dust, water and impact resistance IP533. Meets the VIDG5 / AES specification for use on emergency service vehicles. Transient voltage protection: Meets ISO7637-2 International standard for 24V DC commercial vehicles.

Description

These units are IP53, so there are no ventilation holes to permit stray objects, dust or water droplets to enter the case, there are no external fuses to be tampered with. Fuses will only blow if there is a fault so there is no need to make them accessible.

Many PowerVerters and DD Series products can be configured with alternative output voltages etc. for specialist applications. All the units consume an offload current of less than 15mA, which is probably less than the self-discharge current of the vehicle’s battery. In most cases this can be ignored, speeding the installation by removing the need to fit a remote switch.

 

                                                                                           Features and Specifications:

Weight250 g
Dimensions89 x 87 x 50 mm
MarkingsCE and E (automotive) marked
Input Voltage Range17-32V DC
Output13.6V DC +15% -20% at extremes of temperature, load, etc.
Intermittent Output Power6A/10A non-isolated, taken for a maximum of 2 minutes followed by 8 minutes of rest
Electrostatic Voltage ProtectionMeets ISO10605, ISO14892, >8kV contact, 15kV discharge
Output NoiseLess than 50mV
Power Conversion EfficiencyTypically 90% of non-isolated units
ConnectionsFour 6.3 mm push-on flat blade connectors, *5-way Phoenix connector including enabling on/off terminal and mating half
Mounting MethodClick ‘n’ fit mounting clip, fitted separately using three hole fixture, *4 hole cradle
Approvals2014/30/EU The general EMC directive, Regulation 10 The automotive directive,93/68/EEC The CE marking directive
Designed ToEN50498, ISO 7637-2, ISO 11452-1, ISO 14982, EN12895, EN60945, EN55022, FCC15B

 

 

 

Additional information

Weight0.5 kg