PowerVerter PV6I Isolated Reducer 6/10A


High-quality fully isolated DC-DC converter. Supplied with mounting bracket, fixing screws and crimp connectors. This unit is suitable for installing radiotelephones in vehicles subject to the Institute of Petroleum specification DOC – 1.92.1. Dust, water and impact resistance IP533. Meets the VIDG5 / AES specification for use on emergency service vehicles.


These units are IP53, so there are no ventilation holes to permit stray objects, dust or water droplets to enter the case. Fuses will only blow if there is a fault so there is no need to make them accessible. All products fit onto a “Click ‘n’ Fit” mounting clip which is fixed in three points, allowing it to be mounted on uneven surfaces. A fixing kit for din rail installation is also available.


                                                                                                Features and Specifications:

Weight 505 g
Dimensions 127 x 87 x 50 mm
Markings CE and E (automotive) marked
Input Voltage Range 17-32V DC
Output 13.6V DC +15% -20% at extremes of temperature
Intermittent Output Power 6A/10A isolated, taken for a max. of 2 min followed by 8 min rest
Electrostatic Voltage Protection >8kV contact, 15kV discharge
Output Noise <50mV pk-pk at continuous load
Off Load Current (Quiescent Current) <15mA
Power Conversion Efficiency Typically 85% for isolated units
Isolation >400Vrms between input, output and case, on isolated products only
Operating Temperature -25ºC to +30ºC, +30ºC to +80ºC de rate linearly to 0A
Operating Humidity 95% max., non-condensing
Casework Anodised aluminium, glass-filled polycarbonate./li>
Connections Four 6.3 mm push-on flat blade connectors, *5-way Phoenix connector including enabling on/off terminal and mating half
Approvals 2014/30/EU the general EMC directive, Regulation 10 the automotive directive, 93/68/EEC the CE marking directive
Designed To EN50498, ISO 7637-2, ISO 11452-1, ISO 14982, EN12895, EN60945, EN55022, FCC15B



Additional information

Weight 0.7 kg