Description
The OWON XDS3202E n-in-1 on-site measurement station xds series n-in-1 digital oscilloscope, usb scope, multimeter oscilloscope, high resolution oscilloscope, wifi oscilloscope and oscilloscope app is one of the most affordable units on the market today. The XDS series introduces us to a 12 / 14 bits hardware ADC and the precision is 16 / 64 times better against other oscilloscopes on the market.
12 / 14-bits ADC and Original Magnifier Function
XDS series introduce 12 / 14 bits hardware ADC, the precision is 16 / 64 times against other oscilloscope on market. Equipping with OWON’s original magnifier function, it can observe the signal low down to 31.25 μV/div.
Multi-Function Mobile Tester
Oscilloscope + signal generator + multimeter + data logger + frequency counter + decoder. Support Li-on battery to implement floating test
Leading 75.000 frame/sec Waveform Refresh Rate, Muti-Level Gray Scale and Colour Temperature Display
N-in-1
|
![]() |
Desktop Oscilloscope Specifications | |
Series | XDS3000 |
Bandwidth Requirements | 200 MHz |
Number of Channels | 2 |
Maximum Real-Time Sampling Rate | 1 GBit / s in single-channel mode 500 MBit / s in dual-channel mode |
Input Parameters | |
Entrance Decoupling | DC, AC, GND |
Input Impedance | 1 mOhm ± 2 %, 15 pF ± 5 pF |
Sensor Attenuation Factor | 0.001 X – 1000 X |
Maximum Input Voltage | 1 MOhm: ≤ 300 V |
Bandwidth Limitation | 20 MHz |
Channel-to-Channel Isolation | 50 Hz: 100 : 1 10 MHz: 40 : 1 |
Delay Time Between Channels | 150 ps |
Horizontal System | |
Waveform Interpolation | sin (x) / x, x |
Memory Size | 40 MB |
Scan Ratio | 1 ns / div – 1000 s / div, 1, 2, 5 step |
Sample Rate Range | 0.05 Samples / s – 1 GBit / s in single-channel mode 0.05 Samples / s – 500 MBit / s in dual-channel mode |
Accuracy | ± 1 ppm |
Time Interval Measurement Accuracy | Single: ± (1 sampling interval + 1 ppm x read + 0.6 ns) greater than 16 average values: ± (1 sampling interval + 1 ppm x read + 0.4 ns) |
Vertical System | |
Vertical Resolution | 8 bits |
Vertical Scan | 1 mV / div – 10 V / div |
Rise Time | ≤ 1.75 ns |
Offset | ± 2 V (1 mV / div – 50 mV / div) |
Low Frequency Response (-3 dB) | ≥ 10 Hz (BNC input) |
DC Gain Accuracy | ± 2% more than 16 average values: ± (3% of the value + 0.05 div) |
Synchronization System | |
Trigger Modes | Edge, pulse, video signal (NTSC,PAL, SECAM), tilt, edge, window, timeout, logical, RS232, I2C, SPI |
Trigger Trigger Level Range | CH1 ~ CH4: ± 5 divisions from the center of the screen |
EXT: ± 2 V | |
EXT/5: ± 10 V | |
Trigger Level Accuracy | CH1 ~ CH4: ± 0.3 div |
EXT: ± (6 % of the + 10 mV setting) | |
EXT/5: ± (6 % of the + 50 mV setting) | |
Trigger Offset | according to the recording length and time |
Trigger Hold Range | 100 ns – 10 s |
50% Customization Level | Input frequency ≥ 50 Hz |
Starting at the Front | |
Launch Mode | Running on a rising edge, on a falling edge |
Trigger by Pulse Duration | |
Launch mode | Positive pulse polarity>,<, = |
Negative pulse polarity>,<, = | |
Trigger Hold Range | 30 ns ~ 10 s |
Launch by Video Signal | |
Signal Standard | NTSC, PAL, SECAM |
Line Number Range | 1 – 525 (NTSC), 1 – 625 (PAL, SECAM) |
Incline Launch | |
Launch Mode | Positive slope >,<, = |
Negative slope >,<, = | |
Trigger Hold Range | 30 ns ~ 10 s |
Run by Rant | |
Launch Mode | Positive slope >,<, = |
Negative slope >,<, = | |
Trigger Hold Range | 30 ns ~ 10 s |
Launch by Window | |
Launch Mode | Positive, negative |
Trigger Position | Input, output, time |
Trigger Hold Range | 30 ns ~ 10 s |
Launch by Time Limit Duration | |
Launch Mode | Rising, falling |
Trigger Hold Range | 30 ns ~ 10 s |
Running on the N-edge | |
Launch Mode | rising, falling |
Trigger Hold Range | 30 ns ~ 10 s |
Front Number | 1 – 128 |
Starting by Logic | |
Logic Mode | AND, OR, XNOR, XOR |
Input Mode | H, L, X, rising, falling |
Output Mode | Goes True, Goes False, Is True >, Is True <, Is True = |
Launch via RS232 | |
Polarity | Normal, inverted |
Launch Condition | Start, Error, Check Error, Data |
Data Transfer Rate | Regular, custom version |
Data Bits | 5-8 bits |
Launching via I2C | |
Launch Condition | Start, Restart, Stop, ACK Lost, Address, Data, Addr/Data |
Address Bits | 7, 8, 10 bits |
Address Range | 0 – 127, 0 – 255, 0 – 1023 |
Byte Length | 1 – 5 |
Running via SPI | |
Launch Condition | Time out |
Trigger Hold Range | 30 ns ~ 10 s |
Data Bits | 4-32 bits |
Setting up a Data Link | H, L, X |
Measurement System | |
Cursor Measurements | △V, △T, △T & △V |
Automatic Measurement | Period, frequency, average, PK-PK, RMS, maximum, minimum, base, amplitude, overshoot, pre-shot, rise time, fall time, positive pulse width, negative pulse width, positive duty cycle, negative duty cycle, delay A → B, delay A → B, RMS cycle length, cursor rms, screen fill factor, phase + pulse counter, pulse counter, rising edge counter, falling edge counter, cycle area and area |
Mathematical Functions | + ,- ,*,/, FFT, FFTrms, Intg, Diff, Sqrt, Custom function, Digital filter (low frequencies, high frequencies, bandwidth, band deviation) |
Waveform Storage | 100 forms |
General Features | |
Display Type | 8 inch TFT LCD screen, 800 x 600 dots, 65536 colours |
Food | 100-240 V AC RMS, 50-60 Hz, CAT II |
Power Consumption | < 24 W |
Fuse Box | T, 2 A, 250 V |
Operating Temperature | 0 °C to 40 °C |
Storage Temperature | -20 °C to 60 °C |
Relative Humidity | Up to 90% |
Working Height | Working distance up to 3000 m |
Storage up to 15,000 m | |
Data Transfer Interface | USB, LAN |
Frequency Meter | There is |
Cooling Method | Natural convection |
Overall Dimensions | 340 x 177 x 90 mm |
Equipment | OWON XDS3202E Digital oscilloscope – 1 pcs
Oscilloscope probes – 2 pcs |
Reviews
There are no reviews yet.