Sale!

OWON HDS200 Series Digital Multimeter

$150.00$296.00

HDS2102HDS2102SHDS242HDS242SHDS272HDS272S
Clear
SKU: 1005002278032000 Category: Tags: , , , ,

Description


The two-channel portable oscilloscope is designed for servicing outdoor objects, quick measurements at the workplace, car maintenance, and so on. The case is made for a smartphone for the purpose of convenient and long-term use of the device. HDS200 Series includes not only the functions of an oscilloscope, but also a full set of multimeter and signal generator. By pressing one button, the device switches between operating modes.

One Machine in Hand, Worry-Free Testing

Suitable for outdoor maintenance, rapid on-site measurement, automobile maintenance, power detection.

HDS 200 Series 2-Channel Handheld Oscilloscope with Three-in-One Function:

  • Oscilloscope + multimeter + waveform generator, multifunction in one
  • 3.5-inch high-resolution, high-contrast colour LCD display, suitable for outdoor use
  • 18650 lithium battery power, providing > 4 hours working time
  • USB Type-C interface, support power bank, support PC
  • Transformers variety of functions in one

 

Transformers Variety of Functions in One

Oscilloscope

Max 10.000 wfms/s waveform
refresh rate

  • Dual channels input, bandwidth up to 100 MHz, max. real-time sampling rate 500 MSa/s
  • Max 8k record length
  • Cursor measurement function
  • Multiple auto measurement functions
  • XY function
  • One-key auto set function, easy to
    detect and debug

Multimeter
20.000 counts, true RMS

  • Voltage, current, resistance, diode, capacitance measuring, and continuity test
  • Auto range function, easy to detect and debug
  • Max AC 750V, DC 1000V input voltage
  • Independent input of multimeter and oscilloscope
  • Reading hold function
  • Relative measurement function

Waveform Generator

Max 25 MHz Frequency Output

  • Output sine, square, ramp, pulse, and built-in special waveforms
  • 0.1 Hz frequency resolution
  • 14-bit vertical resolution, 125 MSa/s high sampling rate
  • 8k waveform length
  • Max 5 Vpp output amplitude

Excellent Power Management

 

 

Ultra-low comprehensive power consumption less than 5 W.Powered by 4400 mAh lithium battery, work continuously for 24 hours. A single battery can supply power normally. Easy battery replacement.

 

 

 

USB Type-C interface can be charged by an adapter or a power bank, and supports PC software connection.

You can connect the meter to a PC host using USB-C to use it with Owon desktop software, control it via SCPI, or use it with a power supply.

 

In addition to being an oscilloscope, it independently acts as a full-featured multimeter with a true RMS value of 20.000 samples. It has the ability to measure voltage, current, resistance, capacitance, continuity and diodes. The readings will be displayed on the display in a convenient large font, as can be seen from the demo video below. Like conventional multimeters, it performs automatic ranking.

 

 

Oscilloscope Specifications
ModelHDS242HDS272HDS2102HDS242SHDS272SHDS2102S
Bandwidth40 MHz70 MHz100 MHz40 MHz70 MHz100 MHz
Channels2-CH Oscilloscope2-CH Oscilloscope+1-CH Generator
Sample Rate250 MS/s500 MS/s250 MS/s500 MS/s
Acquisition ModelNormal, Peak detect
Record Length8K
Display3.5-inch LCD
Waveform Refresh Rate10.000 wfrms/s
Input CouplingDC, AC, and Ground
Input Impedance1 MΩ ± 2 %, in parallel with 16 pF ± 10 pF
Probe Attenuation Factors1X, 10X, 100X, 1000X, 10000X
Max. input Voltage400 V (DC + AC, PK – PK, 1 MΩ input impedance) (10:1 probe attenuation)
Bandwidth Limit (typical)20 MHz
Horizontal Scale5 ns/div – 1000 s/div, step by 1 – 2 – 52 ns/div – 1000 s/div, step by 1 – 2 – 55 ns/div – 1000 s/div, step by 1 – 2 – 52 ns/div – 1000 s/div, step by 1 – 2 – 5
Vertical Sensitivity10 mV/div – 10 V/div
Vertical Resolution8 bits
Trigger TypeEdge
Trigger ModesAuto, Normal, single
Automatic MeasurementPeriod, Frequency, Mean, PK-PK, Max, Min
Cursor MeasurementΔV, ΔT, ΔT & ΔV between cursors
Communication InterfaceUSB Type-C
Multimeter Specifications (Standard)
Max. Resolution20.000 counts
Testing ModeVoltage, Current, Resistance, Capacitance, Diode ,and Continuity test
Input Impedance10 MΩ
Max Input VoltageAC 750 V, DC 1000 V
Max Input CurrentDC : 10 A AC : 10 A
Diode0 – 2 V
Waveform Generator Specifications (Only for HDS242S, HDS272S, HDS2102S)
Frequency OutputSine0.1 Hz – 25 MHz
Square0.1 Hz – 5 MHz
Ramp0.1 Hz – 1 MHz
Pulse0.1 Hz – 5 MHz
Arbitrary0.1 Hz – 5 MHz
Sampling Rate125 MSa/s
Channel1-CH
Amplitude Range20 mVpp – 5 Vpp
Waveform Length8K
Vertical Resolution14 bits
Output Impedance50 Ω

Additional information

Weight0.9 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.