Sale!

Juntek JDS2800-60M 60 MHz DDS Signal Generator

(1 customer review)

$128.00

The device uses direct digital synthesizer (DDS) technology and provides stable, accurate, clean and low distortion signals.

AUEUUKUS
Clear

Description

JDS2800 series dual-channel function signal generator combines multiple functions in one, such as function signal generator, arbitrary waveform generator, pulse generator, sweep, counter and frequency meter, etc. The instrument adopts the direct digital synthesizer (DDS) technology and provides stable, precise, pure and low distortion signals. It’s a great testing or measuring instrument for electronics engineers, electronic laboratory, teaching and researching.

  • Use soft silicone keys instead of traditional overhead keys for high sensitivity and easy operation
  • Fully independent two-channel output, operation synchronization and adjustable phase difference
  • 60 groups of arbitrary wave storage function, the memory depth of each group is 2048 x 14 bits
  • The duty cycle of each channel can be adjusted independently, the adjustment resolution is 0.1 %
  • The user can edit an arbitrary wave on a PC and then upload it for output from the device
  • The PC can be used to control the device
  • The entire output signal can operate for 60 seconds under load short circuit conditions

 

Signal Generator Specifications
Signal Specifications
Bandwidth Requirements 0.01 MHz – 60 MHz
Types of Signals Sinusoidal, Rectangular, Triangular, Pulse (duty cycle correction), Sawtooth, Noise, Partia Sine, CMOS, DC level, Half-wave, Full-Wave, Pos-Ladder, Neg-Ladder, Noise, Exponential Rise, Exponential Fall, Tone, Sinc Pulse, Lorentz Pulse and any other signals (60 forms)
Frequency Ranges Sinusoidal: 0.01 MCG to 60 MHz
Rectangular: 0.01 MCG to 25 MHz
Triangular: 0.01 mcg to 25 MHz
Sawtooth: 0.01 MCG to 6 MHz
TTL digital signal: 0.01 MCG to 6 MHz
Arbitrary signal 0.01 MCG to 6 MHz
Pulse Duration Adjustment 25 ns – 4000 s
Front Duration < 10 ns
Wavelength 2048 points
Sample Rate 266 MBIT / s
Amplitude Resolution 14 bits
Sinusoidal Signal
Harmonic Suppression ≥ 45 dB (<1 MHz), 40 dB (1 MHz – 20 MHz)
Full Harmonic Distortion < 0.8 % (20 Hz – 20 kHz)
Rectangular Signal
Skewed Position 5 %
Pulse Signal
Duty Cycle Range 0.1 % – 99.9 %
Partia Sine
Duty Cycle Range 0.1 % – 99.9 %
Sawtooth Signal
Linearity ≥ 98 % (0.01 Hz – 10 kHz)
Frequency Specifications
Resolution 0.01 MHz
Frequency Error ± 20 ppm
Frequency Stability ± 1 ppm / 3 h
Amplitude Specifications
Range of Sine Wave Amplitudes 2 mV (peak-to-peak) – 5 V (peak-to-peak), frequency > 30 MHz
Square / Triangular Wave Amplitude Range 2 mV (peak-to-peak) – 5V (peak-to-peak), frequency 10 MHz – 25 MHz
Amplitude Resolution 1 mV
Amplitude Stability ± 0.5% / 5 h
Output Impedance 50 ohms ± 10%
Output Protection The outputs can withstand a short circuit for 60 seconds
DC Offset Output signal amplitude: 0 V – 0.2 V
Offset adjustment range: -0.25 V – 0.25 V
Offset resolution: 0.01 V
Oscillation Phase Phase adjustment range 0-359.9°
Phase resolution: 0.1 °
TTL / COMS Output Low level: < 0.3 V
High level: 1 V – 10 V
Level rise / fall time: ≤ 20 ns
Specifications of the Frequency Meter and Pulse Counter
Frequency Measurement Range 1 Hz – 100 MHz
Measuring Range 0 – 4294967295
Counting Mode Manual
Pairing Mode 2 kinds of pairing mode, DC and AC
Specifications of the Oscillating Frequency Generator
Channels CH1 or CH2
Scan Type Linear scan, logarithmic scan
Duration of the Frequency Change Period 0.1 s – 999.9 s
Setting Range Randomly set between the start and end points
Swiping Modes Up, down, up-down
Pulse Burst Generator Specifications
Number of Pulses 1 – 1048575
General Features
Display 2.4 inches, TFT (colour)
Memory 100 groups (from 00 to 99 (when power is turned on, position 00 is loaded)
Interfaces USB, UART with TTL levels for easy user experimentation
Connection Speed 115200 bps
Voltage DC 5V
Production Technology Surface mount, FPGA application, high reliability, long service life
Operating Temperature 0 °C – 40 °C
Operating Humidity < 80 %
Device Dimensions 148 x 108 x 35 mm
Package Dimensions 210 x 150 x 75 mm
Net Weight 270 g
Weight with Package 600 g
Equipment Juntek JDS2800 signal generator – 1 pc
Power supply-1 pc
USB cable – 1 pc
BNC-crocodile cable – 1 pc
BNC-BNC cable – 1 pc
Disk with software – 1 pc

Additional information

Weight 0.6 kg

1 review for Juntek JDS2800-60M 60 MHz DDS Signal Generator

  1. Y***t

    Fast shipping, work great, nice addition to my work bench !

Add a review

Your email address will not be published. Required fields are marked *