Electronic Hot Plate Station


110 V220 V




This heating station is equipped with built-in CPU to controls the temperature.

And aluminum alloy plate on the top has thermal conductivity to ensure even temperature.

This product is suitable for component heating, SMD reengineering, PCB removing and soldering.


  • Voltage: AC 110 ± 10%
  • Power: 850 W
  • Temperature Range: 50 – 350 ° C
  • Temperature Display: 3 bites (display resolution: 1 °C)
  • Constant Temperature Stability: ±1.5 – 0 °C
  • Heating Plate Size: 200 x 200 mm
  • Dimensions: 21.5 x 21.5 x 14 cm


Constant Temperature

Constant temperature heating platform adopts high-performance CPU to control temperature, with accurate temperature control and strong practicability.

Non-slip Rubber Feet, US 110 V Power Cord

Anti-slip design, suitable for a variety of environments, effectively preventing the machine from slipping

Thick US 110 V power cord, high temperature resistance,better conductivity.

Clear Display

LED digital temperature display, intuitive and clear to operate.



Safety Instructions:

  1. Make sure the ground wire of the machine is well grounded!
  2. Do not let the air flow blow directly on the board, otherwise it will affect the heating of the heater!
  3. The table top with the constant temperature platform should be flat without tilt to maintain the level of the aluminum platform, and the desktop material must be heat resistant!
  4. During the work process, the surface of the board and the surrounding area are very hot. Be careful to prevent burns and burns!
  5. Do not use hot plates near flammable objects!
  6. To move or touch the machine, remember to turn off the power and wait until the heating plate is completely cooled to room temperature!
  7. This machine is a high temperature electric heating product. If you do not use the machine, please cut off the power supply to avoid danger and accident!
  8. In order to prolong the life of the heating element and the machine, it is forbidden to use the machine for a long time at high temperature (above 300 °C). Under normal circumstances, the continuous working time of the machine should not exceed eight hours!
  9. The ventilation window on the chassis of the constant temperature platform can not be blocked by foreign objects, to prevent its heat dissipation effect. Metal objects can not be inserted into the chassis from the ventilation window, which may cause electric shock!
  10. Do not place in damp and corrosive places!




Additional information

Weight3.6 kg


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.