Anytone AT-D878UVII “Plus” DMR Handheld Transceiver


Anytone AT-D878UVII Plus Bluetooth Digital DMR Dual-band Handheld Commercial Radio with Roaming and GP, VHF/UHF Dual-band Digital/Analog Part 90 DMR commercial transceiver with 1.77 inch colour TFT display. New AT-D878UVII Plus model includes DMR Roaming, faster processor and larger memory for future enhancements. Includes USB Programming cable.

Out of stock


The Anytone AT-D878UVII Plus is a handheld portable radio for DMR digital radio (compatible with MOTOTRBO Tier 1 and 2), traditional FM is also supported. In contrast to many other DMR devices, the D878UV offers true VFO operation. Here, a radio operator can set a frequency and transmit parameters as usual, instead of accessing pre-programmed memory channels only. This makes this radio much more suitable for amateur radio than other DMR handhelds. Of course, the Anytone D878UV also comes with memory channels, 4000 to be precise. But you don’t just need to depend on pre-programmed channels. A further difference to other DMR devices is the possibility to change most (not all) parameters on the device. So you don’t have to rely on computer programming for every small change. However, the settings for really all parameters (e. g. the DMR ID) are only possible with a corresponding (free) PC software.

The AT-D878UV is the successor to the immensely popular D868UV. New with this radio is – among other things – the APRS function. The ‘878’ has more internal program memory which enables the manufacturer to incorporate more features in software. For example you can now set all APRS parameters through the menu, there is no need to reprogram the codeplug for such changes. And another new feature is ‘roaming’, i.e. the function where a repeater is selected automatically by checking the reachability of repeaters from a pre-defined repater list.

The further feature set of the AT-D878UVII PLus is very extensive. 4000 different channels can be stored (digital and analog, also mixed operation possible); 10000 talk groups are configurable and the memory holds up to 500,000 contacts. In analog operation, functions such as DTMF, CTCSS and DCS are supported, as well as coding with two-tone and five-tone signals. A tone burst of 1750 Hz is also available. Five buttons of the radio can be assigned individually with functions, so that each user can adjust this radio to his or her personal preferences. The 1.77″ large Colour display can be illuminated to different degrees of brightness and is easy to read even in the sunlight. To save power, the display is switched off after an adjustable period of time.

Another feature to highlight is the option to store multiple DMR IDs. So it would be conceivable to use the device both in a professional company radio environment, later on with another ID in the amateur radio band. Or several family members share one device. The Anytone AT-D878UVII Plus is equipped with a GPS receiver, the position data can be transmitted by radio. The AT-D878UV is a Dualband device for 2 m (VHF) and 70 cm (UHF), on both bands you can work analogue in FM or digital in DMR. In addition, a receiver is also available for the WFM broadcast band. The transmitting power can be set in 4 steps from a minimum of one to 6 watts (VHF) or 7 watts (UHF). The headphone/microphone jack is compatible with Kenwood or Wouxun. The antenna connection is a recessed SMA connector, so you can use Diamond’s optional antennas, for example those which end in “J” in the product designation. The programming cable is included in the scope of delivery, the programming software must be downloaded (for free) from the manufacturer.




  • APRS / GPS Capable: DMR-APRS and Analog TX RX APRS Capable (GPS)
  • VHF / UHF Dual Band: Monitor two bands at the same time (V+V, U+U, V+U)
  • High Power Output: 6.0 W, 4.0 W, 2.5 W, 1.0 W selectable TX power output
  • 5 Tone Paging Includes built-in: 2 Tone and 5 Tone Paging feature
  • Programming Cable: Includes USB Programming Cable, free software available for download
  • APRS (GPS): DMR-APRS and Analog APRS Capable (GPS)
  • Additional Memory: Larger Memory for Future Enhancements TFT Display Background Display and Font Colors are User changeable
  • Auto RX Mode Receiver: Auto Selects to incoming Digital or Analog Signal
  • GPS: Built-in GPS feature
  • Memory Channels: 4,000 channels
  • DMR Talk Groups: 10,000
  • Digital Contacts: 500,000 (complete worldwide database from DMR-MARC)
  • Power Levels: 4 programmable power levels: 6 / 4 / 2.5 / 1 Watt Transmit Power Levels
  • Zones: 250 zones, up to 250 channels per zone
  • Bandwidth: 12.5 / 25.0 kHz Analog, and 12.5 kHz DMR
  • Import / Export: Enhanced CPS allows direct input and export of channels, digital IDs and talkgroups
  • Programmable: FCC 47CFR90.203 requires the keypad locked in the shipping configuration
  • Speaker Connection: 2-pin style



Frequency Range140 – 174 / 400 – 480 MHz RX / TX
Channel Capacity4000 channels
Channel Spacing25 kHz (Wide Band) ,12.5 kHz (Narrow Band)
Phase-Locked Step5 kHz, 6.25 kHz
Operating Voltage7.4 V DC ± 20% / (2100 mAh / 3100 mAh)
Frequency Stability±2.5 ppm
Operating Temperature-20℃ ~ +55℃
Size129 × 61 × 39 mm (with battery pack)
Weight282 g (with battery pack, antenna)



Wide bandNarrow band
Sensitivity (12 dB SINAD)
≤ 0.25 μV
≤ 0.35 μV
Digital Sensitivity0.3 uV / -117.4 dBm (BER 5%), 0.7 uV / -110 dBm (BER 1%)
Adjacent Channel Selectivity≥ 70 dB≥ 60 dB
Spurious Emission≤ -57 dB≤ -57 dB
Spurious Rejection
≥ 70 dB≥ 70 dB
Blocking84 dB
Hum & Noise≥ 45 dB≥ 40 dB
Audio Distortion≤ 5%
Audio Power Output1000 mW / 16 Ω



Wide bandNarrow band
Power OutputVHF: 7 / 5 / 2.5 / 1 W, UHF: 6 / 5 / 2.5 / 1 W
Modulation±5.0 kHz @ 25 kHz±2.5 kHz @ 12.5 kHz
Adjacent Channel Power≥ 70 dB≥ 60 dB
Hum & Noise≥ 40 dB≥ 36 dB
Spurious Emission≤ -36 dBm≤ -36 dBm
4FSK Digital Modulation12.5 kHz (data) 7K60FXD
12.5 kHz(data+voice)7K60FXE
Audio Distortion≤ 5%
Error Rate≤ 3%


Additional information

Weight1 kg