Alfatronix AD IC-F5062 (10 Amp) Switch Mode Power Supply

$182.00

This model is suitable for the Icom IC-F5062, IC-F6062 and IC-A120E series of radios, however, we can also supply a specific model PSU to suit specific types of mobile radios. Lead time on special models will be a week (depending on Alfatronix’s stock availability).

Out of stock

Description

This model is suitable for the Icom IC-F5062, IC-F6062 and IC-A120E series of radios, however, we can also supply a specific model PSU to suit specific types of mobile radios. Lead time on special models will be a week (depending on Alfatronix’s stock availability).

The AD Series Desktop Power Supplies include a battery backup output as standard. This can be connected to maintain the charge in a lead acid battery to supply power in the event of a mains failure. As a neat alternative to a loose battery, Alfatronix also supplies a battery backup box, P/N AD BBB. This is designed to fit underneath the desktop supply and radio assembly and includes a 7Ah lead acid gel battery, presenting all three components as one tidy desktop assembly.

 

                                                                                                         Specifications:

Input Voltage Range Auto-select, 85-135V AC and 170-265V AC, 50Hz/60Hz
Output Voltage and Current
13.6V DC. Worst case limits are +/- 4%,108W (9A)
Output Noise <50mV pk-pk at continuous load
Power Conversion Efficiency Typically 83%
Isolation Between Input and Case/Output 1.5kVsc/0.3kVac ms
Isolation Casework to Ground
Connected directly to mains input ground
Normal Operating Temperature 25°C to +30°C / +30°C to +70°C de-rate linearly to 0A
Max Case Temperature 70°C at full load with 25°C ambient
Storage Temperature -25ºC to +100ºC
Operating Humidity 95% max, non-condensing
Casework Anodised aluminium, glass-filled polycarbonate
Connections Input – IEC-320 C14 socket, C13 terminated cordset

Output: 6.3mm push-on blade terminals

Ground: 6.3 mm push-on blade terminals, adjacent to output (additional external ground if required)

Mounting Method By rubber feet on base and direct to radio above
Safe Area Protection Over Current Limited by the current sensing circuit
Over Heat Limited by the temperature sensing circuit
Transients Protected by filters and rugged component
Catastrophic Failure Protected by input and output fuses
Approvals 2014/30/EU The general EMC directive, 2014/35/EU The low voltage directive, 93/68/EEC The CE marking directive

 

 

Additional information

Weight 1.5 kg